hager domovea - 2. USE; 2.1 Dashboard view

Date : 20/09/2012
6T 8205-02a
User manual
USE
7
2. USE
2.1 Dashboard view
This view is used to enter the general commands for your
installation.
By clicking in a frame (lights, shutters, etc.), without
sending a command, you go to a view showing all the
devices in a given category.
Details of the commands available:
Screen Function Clicking on the symbol:
Switching on or off all of the
lights in your installation
Displays all of the lighting
devices in your installation
Moving up or down all of the
shutters and blinds in your
installation
Displays all of the shutter
and blind devices in your
installation
Selecting the heating mode Displays all of the heating
and air conditioning
thermostat devices in your
installation
Displaying the list of active
scenes.
Displays the scenes'
programming schedule.
Alternating display of the
various thermostat and
weather station devices.
Displays details of the
selected device.
Displaying the current Home
Status
Displays the Home Status
menu in order to make
changes.
Displaying the date and time:
Depending on the parameter
settings, the date and time
may be synchronised with an
Internet time-server.
Clicking on the date:
Displays the scheduler for
programming the sequences.