hager TX216 - Page 26

hager
"DALI Gateway C00Cx2" software
Object table
Seite 26 von 130
Function: Staircase timer function
3
Object Function Name Type DP type Flag
5, 12, 19, … , 110
Staircase timer
function start/stop
Group 1 ... 16 1-bit 1.010 C, W, -, (R)
1
Description: 1-bit object for activating or deactivating the switching time of the Staircase timer
function of an output ("1" = on / "0" = off).
Function: Disable function
Object Function Name Type DP type Flag
6, 13, 20, … , 111
117, 123, …, 207
Disable Group 1 ... 32 1-bit 1.003 C, W, – (R)
1
Description: 1-bit object for disabling a group (polarity is parameterizable).
Function: Forced-control position function
Object Function Name Type DP type Flag
6, 13, 20, … , 111
117, 123, …, 207
Forced-control
position
Group 1 ... 32 2-bit 2.001 C, W, – (R)
1
Description: 2-bit object for the forced-control position of a group. The polarity will be provided by
the telegram.
3
The Staircase timer function can only be parameterized for the first 16 groups.
1
Each communication object can be read-out. The readout requires the setting of the R flag.