Why is my Haier AS71NE1HRE Air Conditioner not cooling well?
Poor cooling can occur due to several reasons. Ensure the air filter is clean; it should be cleaned every 15 days. Check for any obstructions blocking the air inlet and outlet. Verify that the temperature is set correctly. Make sure all doors and windows are closed. Reduce direct sunlight by using curtains. Also, consider if there are too many heat sources or people in the room.
Why is my Haier AS71NE1HRE cooling poorly?
Poor cooling in your Haier Air Conditioner can be caused by several factors. Check if the air filter is dirty and clean it, ideally every 15 days. Ensure there are no obstructions blocking the air inlet or outlet. Verify that the temperature is set correctly. Make sure all doors and windows are closed. Reduce direct sunlight by using curtains. Also, consider if there are excessive heat sources or too many people in the room.
Why Haier AS71NE1HRE Air Conditioner does not restart immediately?
When the unit is stopped, it won't restart immediately until 3 minutes have elapsed to protect the system. When the electric plug is pulled out and reinserted, the protection circuit will work for 3 minutes to protect the air conditioner.
How to fix Haier Air Conditioner that won't restart immediately?
To protect the system, a Haier Air Conditioner will not restart immediately after being stopped; a minimum of 3 minutes must pass. This protection circuit also activates for 3 minutes if the unit is unplugged and plugged back in. Alternatively, turn off the A/C first, and wait at least 30 seconds before cutting off the power.
Why does my Haier AS71NE1HRE Air Conditioner smell?
The smells are generated because the system circulates odors from the interior air, such as smells from furniture, paint, or cigarettes.
What to do if my Haier Air Conditioner is making noise?
During operation, a swishing or gurgling noise might be heard due to refrigerant flowing within the system; this is more noticeable in the first few minutes after starting. A cracking noise can occur as the casing expands or shrinks with temperature changes. However, a significantly loud noise from airflow could indicate a dirty air filter.
Why can't I change the fan speed in dry mode on my Haier AS71NE1HRE?
In DRY mode, the Haier Air Conditioner will run intermittently at LOW speed regardless of the FAN setting when the room temperature drops below the set temperature plus 2 degrees Celsius.
General| Type | Split System |
|---|---|
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Consumption (Cooling) | 2190 W |
| Noise Level (Indoor) | 49 dB |
| Dimensions (Indoor Unit) | 1013x307x221 mm |
| Dimensions (Outdoor Unit) | 800x333x554 mm |
| Operating Temperature (Cooling) | 18-43 °C |
| Power Supply | 220-240V, 50Hz |
Details the components of the indoor unit, including inlet grille, outlet, and display board.
Identifies the parts of the outdoor unit, such as outlet, inlet, connecting piping, and drain hose.
Illustrates the exterior and interior components of the remote controller and its buttons.
Explains the various buttons and displays on the remote controller for operation and settings.
Provides instructions for installing batteries and resetting the remote controller.
Describes how to use the QUIET mode for silent operation when rest or reading is needed.
Explains how to operate the air conditioner in COOL, HEAT, and DRY modes.
Details the Demand Response Mode (DRED) for energy management during peak demand.
Guides on adjusting airflow direction both up/down and left/right using the remote.
Explains how to select and change the fan speed for optimal comfort.
Describes the HEALTH function for generating anions to purify indoor air.
Details the HEALTH AIRFLOW function for directing air to enhance health benefits.
Explains the POWER operation for rapid cooling and high fan speed.
Guides on setting the timer for automatic start or stop of the air conditioner.
Details how to use the SLEEP mode for a sound sleep by adjusting temperature automatically.
Explains the SMART mode that automatically adjusts settings based on room conditions.
Describes the ECO mode for power saving by automatic adjustment of temperature and compressor.
Describes the FRESH function for exhausting stale air and inhaling fresh air.
Guides on using emergency operation when the remote is lost or for test runs.
Provides instructions on how to clean the air filter for optimal performance.
Covers cleaning and replacement of the air purifying filter for effective operation.
Offers advice on room temperature, airflow, timer use, and cleaning the indoor unit/remote.
Lists cleaning agents that should not be used on the air conditioner unit.
Highlights critical warnings regarding installation, power, and usage to prevent hazards.
Lists important cautions for safe operation, placement, and maintenance of the unit.
Checks for common phenomena like restart delays, noises, and smells during normal operation.
Provides solutions for issues such as mist, fan speed changes, and poor cooling.
Lists key specifications including ambient temperature ranges and fuse types.
To Next Page
