To Next PageTo Next PageWhy does my Haier AS09FBAHRA Air Conditioner not restart immediately?
If your Haier Air Conditioner is stopped, it includes a protection feature that prevents it from restarting immediately for 3 minutes. This protects the system. Also, when the electric plug is pulled out and reinserted, the protection circuit will work for 3 minutes.
Why is my Haier Air Conditioner cooling poorly?
Poor cooling in your Haier Air Conditioner can stem from several factors. Check if the air filter is dirty; it should ideally be cleaned every 15 days. Ensure there are no obstructions blocking the air inlet or outlet. Verify that the temperature is set correctly and that all doors and windows are closed. During cooling, direct sunlight through windows can impact performance, so use curtains. Also, excessive heat sources or a large number of people in the room can affect cooling efficiency.
Why does my Haier Air Conditioner blow out mist or steam?
During COOL or DRY operation, a Haier Air Conditioner may emit mist due to the rapid cooling of indoor air.
Why does my Haier AS09FBAHRA Air Conditioner smell?
If your Haier Air Conditioner emits smells, it's likely due to the system circulating odors from the room's interior, such as furniture, paint, or smoke.
What to do if fan speed can’t be changed in dry mode on Haier Air Conditioner?
In DRY mode, your Haier Air Conditioner's fan speed cannot be manually adjusted. When the room temperature drops below the set temperature plus 2 degrees Celsius, the unit will run intermittently at a LOW speed, regardless of the fan setting.
General| Cooling Capacity | 9000 BTU/h |
|---|---|
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Type | Split |
| Operating Temperature (Cooling) | 18°C to 43°C |
Identifies and describes the various parts of the indoor unit, including filters and flaps.
Details the buttons, displays, and indicators on the remote control for operating the unit.
Step-by-step guide on how to set the clock function on the remote controller.
Instructions for activating the quiet mode for reduced noise during operation.
Guide to using the cooling, heating, and dehumidifying operating modes.
How to adjust the desired temperature using the TEMP button on the remote.
Instructions on how to change and select the fan speed for optimal airflow.
Explanation and usage of the ECO sensor for energy-saving operation.
How to utilize the health airflow function for improved air circulation.
Details on the self-cleaning function for maintaining the unit's evaporator.
Guide to adjusting the horizontal and vertical airflow direction using the swing feature.
Instructions for setting timed operations for automatic start and stop.
How to use the sleep mode to automatically adjust temperature for a comfortable night's rest.
Explanation of the fan mode and its default settings for airflow.
How to use the smart mode for automatic room condition adjustment.
Details on the health anion function for purifying indoor air quality.
Using emergency on/off and test operation modes for unit control.
Instructions for correctly inserting batteries into the remote controller.
Details on the refrigerant used, its properties, and handling precautions.
Information on compliance with EU directives for electrical and electronic products.
List of essential tools required for the proper installation of the indoor unit.
Criteria and guidelines for choosing the optimal location for indoor unit placement.
Information regarding electrical power connections and circuit requirements.
List of optional and included accessory parts for the air conditioner.
Specifications for the types and sizes of pipes used for installation.
Step-by-step instructions for securely mounting the plate to the wall.
Procedure for creating the wall opening and fitting the piping hole cover.
Guide on how to attach the indoor unit body to the installed mounting plate.
Instructions for making the electrical connections between indoor and outdoor units.
Ensuring proper installation of the drain hose for effective water removal.
Guidelines for safely connecting the unit to the electrical power supply.
Methods for cutting and preparing refrigerant pipes for connection.
Final checklist for installation verification and initial unit testing.
Recommendations for efficient operation, including temperature setting and ventilation.
Instructions for cleaning the air filter to maintain optimal performance.
Steps for replacing the air purifying filter for improved air quality.
Essential warnings and cautions to prevent hazards during operation and installation.
Basic checks for common issues like delayed start or unusual noises during operation.
Technical data, operating temperature ranges, and electrical requirements.
