To Next PageTo Next Page
Need help?Do you have a question about the Haier AU182AEEAA and is the answer not in the manual?
General| Brand | Haier |
|---|---|
| Model | AU182AEEAA |
| Category | Air Conditioner |
| Language | English |
Details the coding system for Haier air conditioner models, explaining each segment.
Outlines the working conditions and climate types (T1, T2, T3) for the air conditioners.
Specifies the operating temperature ranges for indoor and outdoor units during cooling and heating.
Highlights key features such as refrigerant type, universal outdoor unit, quiet operation, and control functions.
Provides detailed technical specifications for the AP482AKEAA model, including capacity, power, and dimensions.
Lists detailed technical specifications for the AU182AEEAA model, including electrical and physical data.
Details technical specifications for the AU242AGEAA model, covering its electrical, physical, and refrigerant data.
Presents technical specifications for AU48NAIEAA and AU60NAIEAA models, including electrical and physical data.
Provides critical safety warnings regarding electrical shock, fire hazards, and proper handling of the unit.
Details safety measures for installation, electrical connections, and maintenance to prevent accidents.
Illustrates the physical dimensions of the AP482AKEAA model with clear measurement indicators.
Shows the physical dimensions for the AU182AEEAA model, including wiring terminal details.
Displays the physical dimensions and wiring terminal information for the AU242AGEAA model.
Provides physical dimensions and screw hole details for AU48NAIEAA and AU60NAIEAA models.
Refers to specific instructions for installing the outdoor unit of the air conditioner.
Identifies key parts of the AP482AKEAA indoor unit, such as outlet grill and operation panel.
Illustrates and labels the main components of the AU182AEEAA outdoor unit.
Explains how the indoor unit for cabinet type can be controlled using the YR-H49 remote controller.
Details the AUTO FAN control logic for cooling and heating modes in cabinet indoor units.
Describes automatic mode selection and single cooling mode operation based on temperature.
Explains COOL mode compressor control and the anti-freezed protection mechanism.
Outlines control logic for DRY, Fan, and HEAT modes, including protections and functions.
Details the conditions for auxiliary electric heating and the SLEEP function operation.
Covers system protections like 3-minute, sensor failure, and communication failure protections.
Explains the control logic for the outdoor unit motor in cooling and heating modes.
Describes the conditions and operation for defrosting and the crankcase heater.
Details overheat, over current, and pressure protection mechanisms for the unit.
Illustrates the refrigerant flow and components for the AU182AEEAA model.
Shows the refrigerant circuit and components for AU242AGEAA, AU48NAIEAA, AU60NAIEAA models.
Provides wiring diagrams and PCB photos for various models, aiding in electrical troubleshooting.
Lists the specific characteristics and part codes for various temperature sensors used in the units.
Guides users through diagnosing and resolving issues related to high and low pressure protection.
Provides steps for identifying and fixing problems related to sensor failures.
Outlines procedures for troubleshooting specific faults related to low pressure protection.
Details troubleshooting steps for resolving high pressure protection faults.
Guides on diagnosing and fixing communication errors between indoor and outdoor units or controllers.
Covers troubleshooting for high current, external alarms, and system overload issues.
Provides troubleshooting steps for overcurrent protection in single-phase fixed frequency models.
Guides on resolving issues related to temperature cutoff protection and refrigerant charge.
Details troubleshooting for drain system faults and phase loss or failure issues.
Provides a flowchart for diagnosing and fixing problems with the indoor fan motor.
Offers general troubleshooting steps before replacing PCB, focusing on operating conditions and connections.
Presents heating capacity data for AU182AEEAA across various indoor conditions.
Shows power input data for AU182AEEAA in heating mode across various indoor conditions.
Displays cooling capacity and power input data across various indoor conditions for specific models.
Presents heating capacity data for AU242AGEAA across various indoor conditions.
Shows power input data for AU242AGEAA in heating mode across various indoor conditions.
Displays cooling capacity data for AU242AGEAA across various indoor conditions.
Shows power input data for AU242AGEAA in cooling mode across various indoor conditions.
Illustrates sound pressure levels for AU182AEEAA across frequencies and operating modes.
Displays sound pressure levels for AU48NAIEAA across frequencies and operating modes.
Shows sound pressure levels for AU60NAIEAA across frequencies and operating modes.
