What to do if my Haier H3PH-1J10K-EU Inverter shows Over-Load?
If your Haier Inverter indicates an Over-Load, it means the backup load power is too large, or some inductive load startup power is too large. You should remove some of the backup load or remove the inductive load on the backup.
Why does my Haier H3PH-1J10K-EU show CAN Fail?
CAN Fail indicates a communication failure between the inverter and the battery. Here's what you should do: * Check the cable conditions. * Ensure the cable is plugged into the CAN port of both the battery and the inverter. * Verify you are using the correct cable, as some batteries need a special cable from the battery manufacturer.
What does OV-Vbatt mean on my Haier Inverter and how to fix it?
If your Haier Inverter displays OV-Vbatt, it indicates an over-voltage issue with the battery. First, verify the battery voltage is within the specified standards. Next, measure the battery voltage at the inverter connection point. If the problem persists, contact your battery manufacturer for further assistance.
How to fix a Fan Alarm on a Haier H3PH-1J10K-EU?
If your Haier Inverter is showing a Fan Alarm, check if the internal fan is working correctly or if it is jammed. Clear any obstructions to the fan's movement.
What to do if I see a Surge Alarm on my Haier H3PH-1J10K-EU Inverter?
If your Haier Inverter displays a Surge Alarm, this indicates a grid side fault. Restart the device. If the alarm persists, contact the manufacturer's customer service.
What does OV-TEM mean on my Haier Inverter?
If your Haier Inverter displays OV-TEM, it indicates an over-temperature issue. Check whether the surrounding environment of the inverter has poor heat dissipation. Also, confirm whether the product installation meets the requirements.
What does OV-DC01 mean on my Haier H3PH-1J10K-EU Inverter?
If your Haier Inverter displays OV-DC01, it indicates that the PV voltage is abnormal. Restart the system and check if the fault continues.
What does ARC- FAULT mean on my Haier H3PH-1J10K-EU?
If your Haier Inverter displays ARC- FAULT, it means that you should verify connections are tight within your PV system. Arc fault settings can be changed in advanced settings if further adjustment is necessary.
What does GRID-INTF02 mean on my Haier Inverter?
If your Haier Inverter displays GRID-INTF02, confirm whether the grid is seriously distorted and check whether the AC cable is connected reliably.
What does DCInj-FAULT mean on my Haier Inverter?
If your Haier Inverter displays DCInj-FAULT, confirm that the grid is abnormal. Also, confirm that the AC cable connection is not abnormal and restart the system to see if the fault continues.
Explains the meaning of Danger, Warning, Caution, and Note symbols.
Provides general safety instructions for inverter installation and operation.
Specifies conditions and requirements for using the inverter safely.
Provides instructions on connecting the PV input cables, including crimping.
Introduces AC cable connections and distinguishes between Grid and Backup ports.
Provides details for connecting the AC Grid port, including cable specifications.
Provides specifications for the AC Backup port connection.
Lists essential checks and preparations before commissioning the inverter.
Guides users through the process of connecting to the inverter via Bluetooth.
General| SEER | 6.1 |
|---|---|
| SCOP | 4.0 |
| Energy class (cooling) | A++ |
| Energy class (heating) | A+ |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Noise Level (Outdoor) | 50 dB |
To Next Page