Haier HAISJ64MC - User Manual

Questions and Answers

K
Kevin JonesAug 15, 2025
What to do if the LED doesn't come on when my Haier Hob is plugged in?
- M
  marybarreraAug 15, 2025
  What to do if the LED doesn't come on when my Haier Hob is plugged in? First, check if the plug is tightly secured in the outlet and that the outlet is working. If that's not the issue, the accessorial power board and the display board may have a connection failure, so check the connection. Alternatively, the accessorial power board or the display board might be damaged, requiring replacement.
R
Randy PerezAug 18, 2025
Why does my Haier HAISJ64MC Hob stop heating suddenly and display flashes “u”?
- W
  Warren GibbsAug 18, 2025
  Why does my Haier Hob stop heating suddenly and display flashes “u”? This can happen if the pan type is wrong; use the proper pot as described in the instruction manual. It might also happen if the unit is overheated; wait for the temperature to return to normal and then push the “ON/OFF” button to restart the unit.
A
Allison JohnsonAug 21, 2025
What to do if the Cooking Mode Indicator comes on, but heating does not start on my Haier HAISJ64MC?
- D
  Dr. Joanna GilmoreAug 21, 2025
  What to do if the Cooking Mode Indicator comes on, but heating does not start on my Haier Hob? The ambient temperature may be too high, or the air intake or air vent may be blocked. Also, there might be something wrong with the fan, so check whether the fan runs smoothly and replace it if necessary. Finally, the power board could be damaged and need replacement.
B
Bradley HuffmanAug 25, 2025
Why some buttons can’t work, or the LED display is not normal on my Haier Hob?
- E
  Eduardo MaxwellAug 25, 2025
  Why some buttons can’t work, or the LED display is not normal on my Haier Hob? This may be because the display board is damaged and needs to be replaced.
A
Aaron ClarkeAug 27, 2025
Why do heating zones of the same side display “u” on my Haier HAISJ64MC Hob?
- A
  Antonio HansenAug 27, 2025
  Why do heating zones of the same side display “u” on my Haier Hob? The power board and the display board may have a connection failure, so check the connection. The display board of the communicate part might be damaged, requiring replacement. Alternatively, the main board could be damaged, needing replacement of the power board.
J
Julie NelsonAug 30, 2025
What to do if there is a high temperature of IGBT on my Haier HAISJ64MC?
- N
  Neil CollinsAug 30, 2025
  What to do if there is a high temperature of IGBT on my Haier Hob? Wait for the temperature of IGBT to return to normal. Then, touch the “ON/OFF” button to restart the unit. Check whether the fan runs smoothly; if not, replace the fan.
J
Jared DuncanSep 2, 2025
Why does the fan motor sound abnormal on my Haier Hob?
- C
  Clayton OwenSep 3, 2025
  Why does the fan motor sound abnormal on my Haier Hob? The fan motor may be damaged and needs to be replaced.
M
Melissa CookSep 5, 2025
What to do if there is a ceramic plate temperature sensor failure (short circuit) on my Haier Hob?
- P
  Patricia MendozaSep 5, 2025
  What to do if there is a ceramic plate temperature sensor failure (short circuit) on my Haier Hob? Check the connection or replace the ceramic plate temperature sensor.
L
Lisa MunozSep 8, 2025
What to do if there is a high temperature of ceramic plate sensor on my Haier Hob?
- M
  Mary ClarkSep 8, 2025
  What to do if there is a high temperature of ceramic plate sensor on my Haier Hob? Wait for the temperature of the ceramic plate to return to normal. Touch the “ON/OFF” button to restart the unit.
A
Allen HancockSep 12, 2025
What to do if the supply voltage is above the rated voltage for my Haier HAISJ64MC?
- K
  Kathy MccarthySep 12, 2025
  What to do if the supply voltage is above the rated voltage for my Haier Hob? Please inspect whether the power supply is normal. Power on after the power supply is normal.