Haier HB25FSSAAA - Pre-Operation Preparation Steps; Initial Power On and Memory Function; Selecting Operating Modes; Loading Food for First Use

9
GB
GB
Pre-use preparation procedures for this product
1 Power on
When the power is on, the temperature is of the actual
refrigerating temperature and freezing temperature. At this
moment, the refrigerating temperature is set at 5 °C, the
freezing temperature is set at -18 °C, and the button is
unlocked.
2 The appliance has a power-off memory
function
Afterswitchingonforthersttime,themachinewillrun
according to the last power-off setting.
(See “Outage memory function” on page 14 for details).
3 Select the working mode for the
appliance
You may need to select one of the following two ways to set the
appliance:
Articial intelligence mode:
 Underarticialintelligencemode,theinnerappliancecanbe
automatically adjusted at a temperature for food storage. If
you do not have any special requirements, we recommend
thatyouusearticialintelligencemode.
 (Forspecicsettingmethods,referto“Articialintelligence
function setting” on page 12).
Manual adjusting mode:
If you want to manually adjust the temperature of the
appliance in order to store a particular food, you can set the
temperature via a temperature adjusting button.
 (Forspecicsettingmethods,referto“Appliancetemperature
setting” and “Freezer temperature setting” on page 11).
4 Put the food into the appliance
After a period of power operation, the appliance has cooled
downsufciently,youcanofciallyputfoodinanduseit.If
there are lots of fresh foods (such as meat) to be placed into
the freezing chamber, the user should turn on the “quick-freeze”
function 12 hours before putting the food inside.
5 Turn off
Empty the appliance before turning off.
To turn the appliances off, please pull the power cable
out of the power socket.