Se
r
vice Manual
Model No: HD80-01/HD70-01
Issue
Re
v.
1-2. General Guidelines
1-3. Caution and Warning symbols
1-4. Function indication symbols
When servicing,observe the original lead dress.If a short circuit is found, replace all parts
which are overheated or damaged by the short circuit.After servicing ,see to it that all the
protective devices such as insulation barriers ,insulation papers shields are properly installed .
Confirm that the screws,parts and wiring which were removed in order to service are put in
the original positions, or whether there are the portions which are deteriorated around the
service places serviced or not. And be sure safety of that.
Most important thing is to list up the potential hazard or risk for the service personnel to open
the units and disassemble the units. For example, we need to describe properly how to
avoid the possibility to get electrical shock from the live power supply or charged electrical
parts (even the power is off).
(You will see them in the specification table)
This symbol indicates that there are im
portant operating and maintenance instructions
in the literture accompanying the appl
iance.
This symbol indicates that there are im
portant operating and maintenance instructions
Signify the
dryer
doesn t have this function.
- 3 -
To Next Page
Loading...
Need help?
General
