What to do if my Haier TV has no sound?
First, check if the Mute mode is enabled by pressing the Mute button. If that's not the issue, switch to another channel to see if the problem persists. As well, try increasing the volume by pressing the VOL+ button.
Why is my Haier TV screen blank?
Ensure that the correct signals are being input to your Haier TV. Press the INPUT button to change the signal input to TV. If the issue remains, try restarting the TV by disconnecting and reconnecting the power supply.
Why is there no picture on some channels on my Haier TV?
Ensure the correct channel is selected on your Haier TV. Adjust the antenna, and make further adjustments using Fine Tune and Manual Scan options.
Why is my Haier TV showing black and white on some channels?
First, determine if the same problem occurs on other channels of your Haier TV. After that, check out of picture and sound systems. For color adjustments, refer to relative instructions in the Manual.
What to do if my Haier HL32K1b is out of control?
Disconnect your Haier TV from the power supply, wait 10 seconds, and then reconnect it. If the problem continues, assistance from authorized after-sales service is needed.
What causes horizontal or vertical bars on my Haier HL32K1b TV screen?
Check for any local interference near your Haier TV, such as electrical appliances or power tools.
General| Display Technology | LCD |
|---|---|
| Screen Size | 32 inches |
| Resolution | 1366 x 768 |
| Refresh Rate | 60 Hz |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Built-in Wi-Fi | No |
| Smart TV | No |
Explains hazard symbols and provides general safety guidelines for TV operation.
Outlines compliance with FCC rules for digital devices and potential interference.
Details the buttons and input/output ports located on the side panel of the TV.
Illustrates and describes the various input and output ports available on the rear of the TV.
Explains the function of each button on the remote control for operating the TV.
How to power the TV on and off using the remote or standby mode.
Choosing from preset picture modes like Standard, Vivid, Custom, and Mild.
Adjusting individual picture settings such as brightness, contrast, color, and sharpness.
Choosing different audio modes like Concert, Living Room, or Hall.
Adjusting audio parameters like balance, bass, treble, and SRS TS XT.
Explains TV and movie rating systems for blocking content.
Configuring blocking schemes and changing the access password for the lock menu.
Setting up channel blocks and enabling the parental lock feature.
Steps to program the remote control by entering device codes.
Explains manual and automatic scan modes for programming the remote.
Instructions for cleaning the TV screen and cabinet to ensure longevity.
Solutions for common TV problems like no picture, no sound, or picture distortion.
Details Haier's product warranty terms, coverage, and service contact information.
To Next Page
