What to do if my Haier HLC22R has no picture and no sound?
If your Haier TV shows no picture and produces no sound, ensure the TV is correctly plugged into a functioning power outlet and that electricity is available.
Why is my Haier TV screen blank?
If your Haier TV screen is blank, ensure the correct signals are being input. Try pressing the INPUT button to switch the signal input to TV. If the power supply was interrupted, try restarting the television.
How to fix no sound on Haier HLC22R TV?
If there is no sound on your Haier TV, first, check if the Mute mode is enabled by pressing the Mute button. If that's not the issue, switch to another channel to see if the problem persists. You can also try pressing the VOL+ button to increase the volume.
What to do if my Haier HLC22R has spots with some or all pictures?
If your Haier TV displays spots on some or all pictures, verify that the antenna is correctly connected and in good condition. Also, try making a fine adjustment of the channel.
Why is there no picture on some channels on my Haier HLC22R TV?
If you're not getting a picture on some channels on your Haier TV, first, check if you have selected the correct channel. If so, try adjusting the antenna. You can also make adjustments using Fine Tune and MANUAL Scan.
Why is there no color for some channel programs (black and white) on my Haier HLC22R?
If some channel programs appear in black and white on your Haier TV, check if the same problem occurs on other channels. Also, check the picture and sound system. You may need to adjust the color settings.
What causes horizontal or vertical bars or picture shaking on Haier TV?
Horizontal or vertical bars or picture shaking on your Haier TV can be caused by local interference. Check for nearby electrical appliances or power tools that might be causing interference.
What to do if my Haier HLC22R is out of control?
If your Haier TV is out of control, disconnect it from the power supply. Wait 10 seconds, and then reconnect it to the power supply.
To Next Page
General
