To Next PageTo Next PageHow to fix no sound on Haier HL42XK1 TV?
If there is no sound on your Haier TV, first, press the Mute button to verify if Mute mode is enabled and disable it. If that doesn't work, switch to another channel to see if the problem persists. You can also try pressing the VOL+ button to increase the volume.
Why is there no picture or sound on my Haier HL42XK1 TV?
If your Haier TV has no picture and no sound, ensure that the television is properly plugged in and supplied with power. Also, check if electricity is available.
What to do if my Haier HL42XK1 screen is blank?
If you're seeing a blank screen on your Haier TV, make sure the correct signals are being input. Try pressing the INPUT button to change the signal input to TV. If the power supply was interrupted, try restarting the television.
What to do if my Haier HL42XK1 is out of control?
If your Haier television is out of control, disconnect it from the power supply. Wait 10 seconds, and then reconnect it. If the problem persists, no answer.
Why is there no picture on some channels on my Haier HL42XK1 TV?
If you're experiencing no picture on some channels with your Haier TV, first, verify that the correct channel is selected. If it is, try adjusting the antenna. You can also make adjustments using Fine Tune and MANUAL Scan.
Why are there spots on the picture of my Haier HL42XK1?
If you're seeing spots on some or all pictures on your Haier TV, verify that the antenna is correctly connected and in good condition. You may also need to make fine adjustments to the channel.
Why does my Haier HL42XK1 TV have horizontal or vertical bars, or picture shaking?
If your Haier TV is displaying horizontal or vertical bars, or the picture is shaking, check for local interference from electrical appliances or power tools.
Safety and servicing guidelines for experienced repair technicians.
Regulations, warnings, and important safety notices for servicing procedures.
Safety precautions for handling the CRT tube to prevent injury.
Procedures for ensuring safety and proper installation after repairs.
Details the main and AV boards, including connectors and function descriptions.
Instructions for removing the power supply module.
Instructions for entering and exiting the TV's service or factory mode.
Basic troubleshooting steps for common TV issues like no picture or sound.
Diagnostic flowchart for troubleshooting power supply board issues.
Troubleshooting steps for issues related to the main circuit board.
Identifies and explains various types of panel failures and their causes.
Safety and servicing guidelines for experienced repair technicians.
Regulations, warnings, and important safety notices for servicing procedures.
Safety precautions for handling the CRT tube to prevent injury.
Procedures for ensuring safety and proper installation after repairs.
Details the main and AV boards, including connectors and function descriptions.
Instructions for removing the power supply module.
Instructions for entering and exiting the TV's service or factory mode.
Basic troubleshooting steps for common TV issues like no picture or sound.
Diagnostic flowchart for troubleshooting power supply board issues.
Troubleshooting steps for issues related to the main circuit board.
Identifies and explains various types of panel failures and their causes.
General| Screen Size | 42 inches |
|---|---|
| Display Type | LCD |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Smart TV | No |
| Wi-Fi | No |
| Refresh Rate | 60 Hz |
| Weight | 10.5 kg |
| Resolution | 1920 x 1080 |
