What to do if my Haier HL19R screen is blank?
If your Haier TV screen is blank, ensure that the correct signals are input. Try pressing the INPUT button to change the signal input to TV. If the power supply has been interrupted, try restarting the television.
Why is there no sound on my Haier TV?
If there is no sound on your Haier TV, first press the Mute button to verify if Mute mode is enabled. If not, switch to another channel to see if the problem persists. You can also press the VOL+ button to increase the volume and see if that resolves the issue.
Why is there no picture on some channels on my Haier TV?
If there is no picture on some channels on your Haier TV, first verify that the correct channel is selected. If it is, try adjusting the antenna. You can also make adjustments using Fine Tune and MANUAL Scan.
What to do if my Haier TV is out of control?
If your Haier TV is out of control, disconnect it from the power supply. Wait 10 seconds, and then reconnect it to the power supply.
General| Screen Size | 19 inches |
|---|---|
| Display Type | LED |
| HDMI Ports | 1 |
| USB Ports | 1 |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Power Consumption | 30W |
| Resolution | 1366 x 768 |
| Sound Output | 10W |
| Weight | 2.7 kg (with stand) |
To Next Page
