1. Locate the best place for using your NEW compact portable washer.
Make sure it is near a 120 volt outlet and a water source, like a sink,
with a drain.
2. Screw on the bottom plate with the six (6) screws provided.
3. Connect the water inlet hose, Using the Quick connect fi tting, or directly connect
to faucet.
4. Place drain hose in drain or inside the sink using the Drain Hook.
5. Make sure the lint fi lter is in place, it is installed on the side of the drum.
6. Ensure nothing but clothing is in the washer, then plug power cord into a
15 AMP 110-120 VOLT, 60 HZ GROUNDED OUTLET ONLY.
7. Proceed by pressing the "POWER ON" button.
8. Select water height
9. Select “NORMAL” washing using the “CYCLE” button, then press the
"START" button.
Power
To Next Page
Loading...
Need help?
General