a Wash Basket Brace
•
Using two or more people, lift the washer o of the packing base and the
molded plastic support.
NOTE: It is possible for the plastic support, under the U bracket, to remain
attached to the bottom of the washer. Make sure it is removed with the foam
base.
a Plastic
Support
b Foam
Base
2. Inspect the washer, and remove any remnants of packaging, tape or printed
materials before using the washer.
3. Properly dispose of /recycle all packing material.
STEP 2 - INSTALL BOTTOM COVER
WARNING
Electrical Shock Hazard
Install bottom cover.
Lock all four casters prior to operating washer.
Failure to do so can result in death, electric shock or personal injury.
To Next Page
Loading...
Need help?
General