Menu Operations
2. Press CH+/CH- button to enter the picture menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired picture quality has been achieved .
Function:
BRIGHTNESS :
CONTRAST :
SHARPNESS :
COLOR : Press VOL+/VOL- to adjust the color
HUE :
COLOR TEMP : Press to select the color temperature from
Adjust the brightness of the picture . By increasing the level, it
will lighten the dark parts of the picture and by decreasing the level it will
darken the lighter parts of the picture.
Adjust the contrast of the picture . The contrast becomes higher as
the number increases.
Adjust the amount of the detail enhancement , the image
sharpness rises as the number increases (By increasing the level, it will show
cleaner and clearer images and by decreasing the level, it will make the picture
smoother).
Adjust the tone of the picture . This will appear and can be adjusted only in
NTSC mode
WARM/NEUTRAL/COOL .
Picture Menu Options continued
Sound Menu Options
Sound can be adjusted for any input as follows:
1. Press MENU and VOL+/VOL- button until the following menu appears on
the screen
VOLUME
BALANCE
BASS
TREBLE
AUDIO MODE
AVL
SOUND
50
50
30
70
VOICE
OFF
To Next Page
Loading...
Need help?
General
