11
4. Installation
ArtNo.600-0034 - Clearances
Positioning Your Appliance
Choosing the Right Location
This appliance should be installed in a room that is dry
and well ventilated. To provide adequate ventilation, make
sure the refrigerator is at least 10 cm clear on all sides
from kitchen cabinetry (Fig.4-1). Any units placed above
ventilation.
spacing must be left for opening the doors and removing
the shelves (Fig.4-2).
This appliance should be at least 100 mm from any
electric or gas cooker and 300 mm from any coal or oil
stove. If this is not possible, make sure that appropriate
insulation is used.
Avoid exposing the appliance to direct sunlight, and
sources of heat (such as radiators, heaters or cookers).
If this appliance is situated in a cold environment (such as
a shed, outhouse or garage) it will affect its performance.
not consistent and this may damage foods. A consistent
ambient temperature of 10 °C or above is recommended.
Fig.4-1
Fig.4-2
Fig.4-3
All dimensions in cm
(Doors omitted for clarity)
Toe
moulding
10
10
10cm
To Next Page
Loading...
