Operation
ON/OFF TEMP
SET
TIMER
CLOCKSWING
SLEEP
LOCK
RESET
FAN
MODE
HEALTH
1.Status display of air sending
Horizontal flap
( Auto swing )
2.Up and down air flow direction(Use remote controller)
Pos.4
Remote controller
Blank
Move the vertical blade by a knob on air
conditioner to adjust left and right direction
referring to Fig.
3.Left and right air flow adjustment
(manual)
Air Flow Direction Adjustment
Cautions:
Hints
As cold air flows downward in COOL mode, adjusting air flow horizontally will be much more
helpful for a better air circulation.
( Downward swing )
Pos.3
( Upward swing )
Pos.2
( Cool/Dry standard position)
Pos.1
Do not try to adjust the flap by hand.
When adjusting the flap by hand,turn off the unit ,and use the remote controller to 
restart the unit.
When humidity is high,condensate water might occur at air outlet if all vertical louvers
are adjusted to left or right. 
It is advisable not to keep horizontal flap at downward position for a long time in COOL
or DRY mode ,otherwise, condensate water might occur.
.
For each press of SWING button, air flow direction on remote
controller display as follows according to different operation modes:
Pos.1 Pos.2 Pos.3 Pos.4
The horizontal flap
  will 
swing according to the above positions
4