What does CLR FLTR mean on my Haier HW80-B14979?
If your Haier Washer is displaying 'CLR FLTR', it indicates a drainage error where water isn't fully drained within 6 minutes. Check the drain hose installation.
Why is my Haier Washer vibrating so much?
If your Haier Washer is experiencing strong vibrations during spinning, there are a few potential causes. First, check that all transportation bolts have been removed. Next, ensure the appliance is on solid, level ground. Finally, verify that the machine load is correct and balanced.
What causes a strange sound in Haier HW80-B14979 Washer?
A strange sound in your Haier Washer could be due to the appliance not being on solid ground or not being levelled. Ensure solid ground and a levelled position. Also, ensure pockets are emptied of keys, coins etc.
Why is my Haier Washer spinning failing?
Spinning may fail in your Haier Washer because of an unbalance of laundry. Check the machine load and laundry, then run a spinning programme again.
What to do if my Haier HW80-B14979 shows CLR FLTR error?
If the Haier Washer displays 'CLR FLTR', it indicates a drainage error where water isn't fully drained within 6 minutes. You should clean the pump filter and check the drain hose installation. It may also mean the door is not shut properly, the water level was not reached after 12 minutes, or that the drain hose is self-syphoning. Make sure that the tap is fully opened and water pressure is normal. Check the drain hose installation. In the case of a water protective level error or a temperature sensor error, contact After sales service.
Why is my Haier HW80-B14979 Washer not spinning?
If your Haier Washer fails to spin, check the machine load and laundry, and then run a spinning program again.
What to do if my Haier Washer won't drain?
If your Haier Washer isn't draining properly, the drain hose might be blocked, so try unblocking it. Also, the drain hose end should not be higher than 100 cm above the floor. Ensure the drain hose is properly installed.
What to do if my Haier HW80-B14979 is not spinning?
If your Haier Washer is not spinning, check the machine load and laundry, and then run a spinning programme again.
Why is my Haier Washer not working?
If your Haier Washer isn't operating, first, check if the programme has been started. Ensure the door is properly closed and the machine is switched on. Verify the power supply and deactivate the child lock if it's activated.
Why is my Haier HW80-B14979 vibrating so much while spinning?
If your Haier Washer is experiencing strong vibrations while spinning, make sure to remove all transportation bolts. Also, ensure the appliance is on solid, level ground and that the machine load is properly balanced.
General| Door color | Black |
|---|---|
| Door hinge | Right |
| Motor type | Beltless |
| Water fill | Cold |
| Control type | Rotary, Touch |
| Display type | LED |
| Loading type | Front-load |
| Tub material | Plastic |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | Yes |
| Custom panel-ready | - |
| Illumination color | Blue |
| Appliance placement | Freestanding |
| Drum capacity | 8 kg |
| Drying capacity | - kg |
| Cycle time (max) | 215 min |
| Wi-Fi controlled | No |
| Delay start (max) | 24 h |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 69 dB |
| Noise level (wash) | 54 dB |
| Noise level (drying) | - dB |
| Number of washing programs | 16 |
| Power plug type | Type F (CEE 7/4) |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Energy efficiency scale | A to G |
| Water consumption per cycle | 44 L |
| Energy consumption washing per cycle | - kWh |
| Water consumption washing & drying per cycle | - L |
| Package depth | 591 mm |
| Package width | 653 mm |
| Package height | 890 mm |
| Annual energy consumption washing | 119 kWh |
Weight and Dimensions| Depth | 460 mm |
|---|---|
| Width | 595 mm |
| Height | 850 mm |
| Weight | 72000 g |
| Package weight | 77000 g |
To Next Page
