How to improve the washing result of my Haier HW80-B14979?
If the 'Washing result' is not satisfactory in your Haier Washer, select another programme that better matches the degree of pollution. Ensure you are using enough detergent according to the degree of pollution and manufacturer's instructions. Reduce the load if the maximum has been exceeded, and loosen the laundry if it's unevenly distributed.
How to reduce excessive foam in the detergent drawer of Haier HW80-B14979?
To address excessive foam in the detergent drawer of your Haier Washer, check if you are using the appropriate detergent and reduce the amount of detergent used.
Why is my Haier Washer draining?
If your Haier Washer is draining, ensure the drain hose is properly installed and that its height is not below 80 cm. Also, make sure the drain hose end is not submerged in water.
Why is my Haier HW80-B14979 not filling with water?
If your Haier Washer isn't filling with water, start by checking the water tap to ensure it's open. Then, inspect the inlet hose for any kinks. Also, verify that your water pressure is at least 0.03 MPa, ensure the door is properly closed, and confirm there are no issues with the overall water supply.
What to do if my Haier HW80-B14979 operation stops before completing wash cycle?
If your Haier Washer stops before completing the wash cycle, check both your power and water supply to ensure they are functioning correctly.
What to do if Water level in drum is too high in Haier Washer?
If the water level in the drum of your Haier Washer is too high, check and fix the block, kink of water pressure switch. Also, check if water inlet valve cannot stop when power off, if so, replace water inlet valve.
What to do if there is Unlocking error Locking error in Haier HW80-B14979 Washer?
If you're experiencing an unlocking or locking error with your Haier Washer, shut the door properly. If the problem still exists, please check the door lock and wire connection then fix.
What should I do if the distribution of laundry is unbalanced during spinning in Haier Washer?
If the distribution of laundry is unbalanced during spinning in your Haier Washer, please ensure the washing machine is leveled. Also, take out the laundry to make it loose, then put it back for spinning.
What to do for Water Inlet error in Haier Washer?
To resolve a water inlet error on your Haier Washer, check whether the tap is turned on, whether the water pressure is too low, and whether the water is cut off.
What should I do for Drainage error in Haier Washer?
To address a drainage error in your Haier Washer, clean the filter trap and check the drain hose for blockage. Also, check the pump and wire connection then fix, and check the drain valve and wire connection then fix.
General| Door color | Black |
|---|---|
| Door hinge | Right |
| Motor type | Beltless |
| Water fill | Cold |
| Control type | Rotary, Touch |
| Display type | LED |
| Loading type | Front-load |
| Tub material | Plastic |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | Yes |
| Custom panel-ready | - |
| Illumination color | Blue |
| Appliance placement | Freestanding |
| Drum capacity | 8 kg |
| Drying capacity | - kg |
| Cycle time (max) | 215 min |
| Wi-Fi controlled | No |
| Delay start (max) | 24 h |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 69 dB |
| Noise level (wash) | 54 dB |
| Noise level (drying) | - dB |
| Number of washing programs | 16 |
| Power plug type | Type F (CEE 7/4) |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Energy efficiency scale | A to G |
| Water consumption per cycle | 44 L |
| Energy consumption washing per cycle | - kWh |
| Water consumption washing & drying per cycle | - L |
| Package depth | 591 mm |
| Package width | 653 mm |
| Package height | 890 mm |
| Annual energy consumption washing | 119 kWh |
Weight and Dimensions| Depth | 460 mm |
|---|---|
| Width | 595 mm |
| Height | 850 mm |
| Weight | 72000 g |
| Package weight | 77000 g |
Immediate safety alerts and warnings for safe operation.
Guidelines for safe operation before, during, and after use.
Overview of Power, Programme Selector, Display, and Detergent Drawer.
Using function buttons for temperature, time, speed, and special features.
Managing wash cycles with Start/Pause and activating Child Lock.
Table detailing wash programs, load capacity, temperature, and fabric types.
Covers care chart, loading, detergent selection, and adding detergent.
Starting, pausing, cancelling cycles, and post-wash procedures.
Solutions for problems indicated by error codes on the display.
Guidance for resolving issues not shown by display error codes.
To Next Page
