11-Installation
NZ AU
27
11.5 Aligning the appliance
Adjust all feet (Fig. 11-7) to achieve a complete level position.
This will minimize
vibra
and thus noise
during
use. It will also reduce wear and tear. We recom
mend to
a spirit level for adjustment. Floor should
be as stable and flat as possible.
1. Loose the locknut (1) by using a wrench.
2. Adjust the high by turning the foot (2).
3. Tighten lock ut (1) against the housing.
11.4 Moving the appliance
If the machine is to be moved to a distant location, replace the transportation bolts removed
before installation to prevent damage: The assembly takes place in reverse order.
11-7
tions
To Next Page
Loading...
Need help?
General
