EN
21
Troubleshooting
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
Error Code Cause Solution
”9“icon blinks
”12“icon blinks
WARNING!
▶ Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
▶
improper repairs can cause considerable consequential damages.
▶ A damaged supply should only be replaced by the manufacturer, its service agent or
Refrigeration sensor failure. Call after-sales service phone.
Call after-sales service phone.
Refrigeration sensor cryogenic alarm.
To Next Page
Loading...
