EN
20
Care and cleaning
The defrosting of the wine cellar is done automatically; no manual operation is
needed.
1. Defrosting
The lamp uses LED as its light source,featuring low energy consumption
and long service life. If there is any abnormality,please contact the customer
service.See CUSTOMER SERVICE.
2.Replacing the LED lamp
Unplug the power cord.
Clean the appliance and door gaskets as described above.
Keep the door open to prevent the creation of bad odours inside.
3. Non-use for a longer period
1. Remove all bottles and unplug the appliance.
2. Secure shelves and other moveable parts in the wine cellar with adhesive tape.
3. Do not tilt the wine cellar more than 45° to avoid damaging the refrigerating system.
4. Moving the appliance
Voltage12V; Max power:2W
Parameters of LED lamp:
WARNING!
Do not replace the LED lamp yourself. It must only be replaced
by either the manufacturer or the authorised service agent.
LED LED
To Next Page
Loading...
