6-3 Setting Up Your Remote Control
Service Manual
Model No.:
- 25 -
1:POWER
To set the TV to standby or power on.
2:NUMBER KEY
For direct access to channels.
3:MENU
To display the menu.
4:CURSOR
To move within the menu.
5:CH. LIST
To display the channel list.
6:VOL+/-
To adjust the sound level.
7:PIC
To switch the picture mode.
8:SLEEP
Set
SOURCE HOT KEYS
Switch to the source that you want directly.
13:Be used in programme edit:
Red: delete
Green: rename
Yellow: move
Blue: skip
14:FB
Fast backward key.
15:FF
Fast forward key.
16:Info
Displays or removes the signal information.
17:MUTE
To disable or enable the sound.
18:RECALL
To access the previously viewed programme.
19:SOURCE
To display source menu.
20:OK
In menu mode, use this key to confirm.
21:EXIT
Used to return to the previous menu or exit menu.
22:SOUND
To switch sound mode.
23:CH+/CH-
To access the next or previous TV Program.
24:ASPECT
To change the picture aspect ratio: 16:9 or 4:3.
27:PREV
Next key.
28:NEXT
Previous key.
29:STOP
Stop key.
30:PLAY/PAUSE
Play / Pause key.
the time to turn off the TV.
91011122526
Insert Batteries Into the Remote Control
12
3
Remark:
1. Remove the battery cover.
2. Inserting the 2 AAA 1.5V batteries making sure the
polarity (+ or -) of the batteries matches the polarity
marks inside the unit.
3. Mount the battery cover.
Replace with new batteries when the TV set begins
to show the following symptoms:
Operation is unsteady or erratic. Sometimes the TV
set does not function with Remote Control Unit.
1) Alkaline Battery Recommended.
2) Remove batteries when they are exhausted or if the
remote control is not to be used for long time.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
17
18
19
20
21
22
23
24
25
26
27
28
29
30
15
16
To Next Page
Loading...
Need help?
General
