Service Manual
Model No.:
- 37-
2.2,then input USB , press "MENU" and choose "update software", and then press "OK".
2.3,Now you should choose "Yes",TV begin to update.You should reset TV after update.
Note: When Upgrade on the process, please don’t Power-Off!
Haier MST6M48 F/W upgrade with USB SOP
Step 1: Ready for F/W Upgrade
1.1 Prepare a USB memory .
1.2 Copy the software le (merg.bin) from your computer to the USB memory, and remove
it from computer’s USB port!
Step 2: F/W Upgrade
2.1 AC ON
How to update software
To Next Page
