234
Smartlink benets
• Easy Installation
Traditional wired connection has complex operation procedures, such as wiring, wire threading, wire binding and
wire cutting etc. which cost a lot of labor and resources.
Smartlink as a wireless communication technology, make installation easier by removing the complex wire
connection procedure.
• Smart networking
Traditional AC wire connection method is hand-in-hand, which is not exible.
Smartlink realizes smart networking by dip switch operation. Besides, when the communication signal of the units
changes, it can seek other strong signal path nearby and keep the stable communication of the system.
• Convenient Maintenance
Under wired connection system, communication error of one unit will cause all the units communication error which
make the system stop running. It is so hard for the maintainer to nd the error unit only by checking all the units in
turn.
But for the system with smartlink, if one unit has communication error which will not affect other units. Because
other units will change their communication path by choosing the stronger communication path to keep the system
running. Therefore, it is convenient for the maintainer to maintain by focusing on the error unit.
• Stable performance.
For the system adopting wired communication, there are a lot of wire related problems such as wire aging and wire
broken caused by users or animals affecting the normal use of units.
Smartlink can reduce the possibility of above problems and make performance more stable by adopting wireless
communication.
• Big benets for reconstructed projects.
For some projects need to be reconstructed, because different brands use different communication wire, it is
necessary to change the wire during the reconstruction. Smartlink has a lot of benets for such projects. Because
wireless Smartlink can remove re-wiring work and will make reconstruction easier.
To Next Page
Loading...
Need help?
General