Haier MRV S II - Installation location; Installation and maintenance space; Single installation around the opening; Single installation around the closed

2222
Single installation around the opening
Inlet
Outlet
Min200mm
Single installation around the closed
Inlet
Outlet
Min300mm
Min300mmMin150mm
Min360mm
Outdoor installation
Installation location
■ Outdoor unit should be placed in well ventilated and dry place.
■ Outdoor noise and exhaust should not affect neighbors and around the ventilation.
■ Ensure the ground steadily reliable.
■ Do not install the outdoor unit on high oil, salt spray or harmful gases.
■ Don't being installed to electromagnetic wave can directly radiate an electricity box and keep off electromagnetic
wave radiation possibly, at least more than 3 meters.
■ When ice snow overlay area installs outdoor unit, please add to defend snow cover.
■ Outdoor unit installed in the shade, avoiding direct sunlight or high temperature heat sources of radiation.
■ Do not install in dusty or polluted place to prevent outdoor unit heat exchanger jam.
■ The outdoor unit should install in the public unapproachable place.
Installation and maintenance space
As shown below, install the outdoor unit should allow sufcient space for handing and maintenance.
Case 1: Stumbling block on the inlet , also upside opens.
H
A
h
Single installation around the opening
Single installation around the closed