Haier QACT17A - Temperature Compensation; Forced Defrost;Cooling;Heating

12
Set Temperature Compensation:
¬àì÷ë÷ëèçìöóïäüòģóõèööäñçëòïç÷ëèÏÊ×åø÷÷òñéòõ%öèæòñçöÝëè
display will then show 0 (default) or current compensation setting. Use
TEMP+/- buttons to adjust the compensation. Compensation can be
set in 1° increments
+/- 8°F (0.5°C increments up to +/-4°C).
• Temperature compensation changes the ambient temperature
reading. If the system is sensing the ambient temperature at 72°F
and the compensation is set to -2° then the system will use 70°F in its
operation to heat or cool.
Forced Defrost:
• Set to Heating mode, high fan, and 86°F (30°C), or highest temperature
if ECO is on. Press TEMP+ 6 times within 5 seconds. Three tones will
æòñĤõð÷ëä÷÷ëèøñì÷ìöìñéòõæèççèéõòö÷ðòçè
Forced Cooling:
• Set mode to Cool. Tap ON/OFF. Tap any button, except ON/OFF, to
light the display. Press and hold ON/OFF for 5 seconds. LL will display
äñç÷ëèæòñ÷õòïúìïïåèèó÷úìæèÝòèûì÷÷øõñòģæòñ÷õòïäñç÷øõñì÷òñ
again.
Forced Heating:
• Set mode to Heat. Tap ON/OFF. Tap any button, except ON/OFF, to
light the display. Press and hold ON/OFF for 5 seconds. HH will display
äñç÷ëèæòñ÷õòïúìïïåèèó÷úìæèÝòèûì÷÷øõñòģæòñ÷õòïäñç÷øõñì÷òñ
again.
Temperature Compensation