R
Renee McleanAug 23, 2025
Why is my Haier XQG50-11 not operating?
- JJoseph BoyleAug 23, 2025
Your Haier Washer/Dryer might not be operating due to several reasons. First, ensure the unit is properly plugged in. Check the electrical wall receptacle to confirm it's providing the correct voltage. It's also worth checking the circuit breaker and replacing the fuse if necessary. Make sure the unit isn't in 'Off' mode and that the door is properly closed. Overloading the washer can also prevent it from starting, so try re-balancing the load. Finally, ensure the control knob is correctly set. Note that the washer pauses in some cycles, which is normal.