22
Aluminium combination ladder (3-section)
The 3-section aluminium combination ladder with
LOT system consists of a double-sided 2-section step-
ladder [A] and a single ladder [G].
The single ladder [G] can be used on the stepladder [A]
as an extension section.
The stepladder [A] can be converted to a single ladder
(extension ladder) and the single ladder [G] can in
turn be used as an extension section.
The different ladder models differ by the number of
ladder rungs and the option for step adjustment.
With the multi-purpose ladders
Art.-no.: 9306-xxx, 9308-xxx, 9309-xxx, 1420-xxx
the single ladder [G] can be removed; it can be used as
a separate ladder.
Aluminium combination ladder (2-section)
The 2-section multi-purpose ladders with LOT system
consists of a free-standing stepladder [A] that can be
climbed on both sides and be converted to a single (exten-
sion) ladder.
The different ladder models differ solely by the number
of ladder rungs.
The relevant technical information and product-specific
information are on the ladder label [E] directly on the
ladder.
Combination ladder (3-section):
[A] Stepladder (with step adjustment function)
[B] Crossbar (level compensation)
[C] Ladder foot
[D] Pair of locking hooks
[E ] Ladder label
[F] Spreader brace
[G] Single ladder (removable)
In the following illustrations,
a 3-section multi-purpose ladder is
shown as an example.
All general information and specifi-
cations apply as well to the 2-section
ladders.
3. Technical information
To Next Page
Loading...
