Hailo ProfiLOT Series - 7. Safety Instructions; General Safety Information

30
Using the ladder for non-professional use:
• Theusermustalwaysensurethattheladderisalso
suitable for the respective use.
Using the ladder for professional use:
• Regularinspectionbyaqualiedpersonisrequired
for commercial use (Industrial Safety Regulation).
• Thecontractorhastoensurethatladdersareinspected
recurrently for proper condition (visual and functional
inspection). For this purpose, the type, scope and
time periods of the required inspections must be
determined.
• Thetimeintervalsfortheinspectionwillconformto
the operating conditions, in particular the frequency of
use and demands during use as well as the frequency
and severity of established defects during the preced-
ing inspections.
• Thecontractoralsohastoensurethatdefectivelad-
ders are removed from use and stored in such a way
that further use is not possible until proper mainte-
nance or disposal takes place.
• Thereisinherentlyariskoffallingwhenusingthe
ladder.
All work with and on the ladder should therefore be
carried out in such a way that a risk of falling is kept
as low as possible.
• Whenusingtheladder,thereisalsotheriskoftip-
ping over.
Individuals can be injured and objects damaged due
to the ladder tipping over.
All work with and on the ladder should therefore be
carried out in such a way that a risk of tipping over is
kept as low as possible.
• Repairsandmaintenanceworkontheladdermustbe
carried out by a qualified person and according to the
instructions of the manufacturer.
7.1 General safety information
7. Safety instructions