Steer Axle
Figures 1 and 2 show
typical brackets for
automatic brake adjuster
applications on steer axle
brake assemblies. Refer to
pages 4 and 5 for detailed
installation procedures.
Drive Axle
Figures 3 and 4 show
typical brackets for
automatic brake adjuster
applications on drive axle
brake assemblies. Refer to
pages 4 and 5 for detailed
installation procedures.
Figure 1
Steer axle with clamp bracket
and flat anchor stud
Figure 3
34° drive axle with strap
bracket
Figure 2
Steer axle with strap bracket
Figure 4
Mack drive axle with clamp
bracket and flat anchor stud
Note: Refer to fundamental parts identification and location on page 10.
2
Typical Applications
To Next Page
Loading...