EasyManua.ls Logo

HALE HP200 - Maintenance Schedule

Default Icon
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HP SERIES
PORTABLE PUMPS
USER OPERATION AND MAINTENANCE
28
7
MAINTENANCE SCHEDULE
MAINTENANCE INTERVALS
To prolong pump life and ensure reliable operation the pump user shall perform the
maintenance described in the following section on a regular basis. The table that
follows provides a listing of the minimum maintenance intervals. Following the chart
are detailed maintenance procedures.
MAINTENANCE OPERATION
Every 8
Hours or
Daily
25 Hours or
Weekly
50 Hours
or Monthly
100 Hours
or Yearly
Yearly
ENGINE MAINTENANCE
Check Oil Level
Change Oil † (NOTE 1)
Change Oil Filter
Clean Foam Air Cleaner
Pre-Cleaner (NOTE 2)
Service Air Cleaner Cartridge
(NOTE 2)
Clean Cooling System (NOTE 2)
Clean Debris Gard (NOTE 2)
Inspect Spark Arrester
Replace In-Line Fuel Filter
Replace Spark Plug
Check Valve Clearance
PUMP MAINTENANCE
Check Oil Level (NOTE 3)
Change Gear Oil (NOTE 3)
Leak Test
† : Change oil after first 8 hours.
NOTE 1: Change oil every 25 hours when operating under heavy load or in high ambient temperature.
NOTE 2: Clean more often under dusty conditions or when airborne debris is present.
NOTE 3: HP100 Model Pump Only.

Related product manuals