About This Manual
Document Purpose and Intended Audience
This document provides the user of the QE65000 Spectrometer with instructions for setting up,
calibrating and performing experiments with their spectrometer.
Document Summary
Chapter Description
Chapter 1: Introduction
Contains descriptive information about the QE65000 Spectrometer
and how sampling works. It also provides a list of system
requirements, interface options, and shipment components.
Chapter 2: Installing the QE65000
Provides installation and configuration instructions.
Chapter 3: Troubleshooting
Contains recommended steps to isolate and correct common
problems.
Chapter 4: Sample Experiments
Offers instructions for preparing for and taking measurements with
the QE65000 Spectrometer.
Appendix A: Calibrating the
Wavelength of the QE65000
Provides instructions for calibrating the QE65000 Spectrometer.
Appendix B: Specifications
Contains technical specifications and connector pinouts for the
QE65000 Spectrometer.
Product-Related Documentation
You can access documentation for Ocean Optics products by visiting our website at
http://www.oceanoptics.com. Select Technical → Operating Instructions, then choose the appropriate
document from the available drop-down lists. Or, use the Search by Model Number field at the bottom
of the web page.
• Detailed instructions for the OOIBase32 Spectrometer Operating Software are located at:
http://www.oceanoptics.com/technical/ooibase32bit.pdf
.
Engineering-level documentation is located on our website at Technical → Engineering Docs.
You can also access operating instructions for Ocean Optics products from the Software and Technical
Resources CD that ships with the product.
220-00000-000-02-0605 v
To Next Page
Loading...