Halo BOLT 57720 Quick Start Guide

*Fully charge your HALO Bolt before first use.
Jump Starng Your Vehicle with the HALO BOLT 57720
1. Plug the jumper cables into your HALO BOLT and aach
jumper cable clamps to car baery.
- Red clamp on posive terminal (+)
- Black clamp on negave terminal (-)
2. Press the “Jump Start” buon and wait for solid green light.
- Pulsing green light indicates safety checks in progress.
- Solid green light indicates ready to start your vehicle.
3. Start your vehicle.
4. Disconnect jumper cable clamps from car baery.
Charging Your Electronic Devices
1. Connect compable electronic devices to the USB ports to
begin charging.
2. Press the ON/OFF power buon.
Using the LED Floodlight
Press the ON/OFF LED Floodlight buon.

Halo BOLT 57720 Specifications

General

Brand	Halo
Model	BOLT 57720
Category	Remote Starter
Language	English