halstrup-walcher PSD4 Series - Run Drive in Reverse; 5 Technical Data

Technical data
7100.006424_Bus description_PSD4xx_CA_H_ENG 37 08.04.2020
4.11 Run drive in reverse
Depending on the model, the drive may be run in reverse up to a certain speed.
ATTENTION Running a PSD4xx in reverse for more than 1-2 seconds at
more than the permissible speed will damage the internal
protection diode and the PSD4xx will be defective.
Please refer to the following table to find the maximum permissible speed:
Device
type
PSD401
/
PSD411
-5V
PSD401 /
PSD411
-8H/14H
PSD403 /
PSD413
-8H/14H
PSD422 /
PSD432
-8V
PSD422 /
PSD432
-8H/14H
PSD426 /
PSD436
-14H
PSD428 /
PSD438
-14H
Maximum
permissible
speed
[rpm]
200
200
48
200
200
60
45
5 Technical data
Technical data and drawings can be found in the current data sheet on the website:
www.halstrup-walcher.de/technicaldocu
Please contact us if you require any further information.