Warranty Duration
Unless otherwise provided in writing by Halverson Wood Products Inc., Halverson Wood Products makes
the following warranty to the first retail purchaser of each HWP-120 attachment:
6 months from the date of delivery to the first retail purchaser.
Warranty Coverage
This warranty applies to the HWP-120 Skid Steer attachment manufactured by Halverson Wood Products,
Inc.
All parts and components of the HWP-120 which, delivered to the original purchaser, are found to be
defective in materials and/or workmanship, will be repaired or replaced as Halverson Wood Products Inc.
elects without charge for parts or repair labor if such defect appears within the warranty period as measured
from the date of delivery to the first retail purchaser and if the delivery is reported within 30 days of delivery
to:
Halverson Wood Products Inc. 218-587-2065, or
205 College St, Pine River, MN 56474, or
E-mail: halversonwoodproducts@halversonwp.com
Obtaining Warranty Service
All Warranty repair work must be authorized by Halverson Wood Products Inc prior to having the work
performed. Call 218-587-2065 for authorization. At the time of requesting warranty service, the purchaser
must be prepared to present evidence of the date of delivery of the HWP-120.
* Without Halverson Wood Products Inc’s authorization, the Warranty is Void!
Warranty Exclusions
Halverson Wood Products' obligations shall not apply to any part or component not manufactured, furnished
or installed by Halverson Wood Products, nor failures caused by such items.
Specifically excluded are failures of and damage to any vehicle or other piece of equipment either rubber
tired or tracked upon which the HWP-120 is attached and any damage to the HWP-
a vehicle or other piece of equipment upon which the firewood processor is attached.
Purchaser’s Responsibilities
• The cost of normal maintenance and depreciation.
• Consequences of negligence, misuse, or accident involving the HWP-120.
• Consequences of service performed by someone other than a party authorized to perform warranty
service, if such service, in Halverson Wood Products' judgment, has adversely affected the performance
or reliability of the processor.
• Consequences of any modification or alteration of the machine or the attachment not approved by
Halverson Wood Products Inc. These include, but are not limited to, hydraulic pressure settings,
contamination of the hydraulic system, changes to the main frame, saw pivot and wedge mounts.
• The effects of hydraulic system neglect as manifested in hydraulic motor pitting, scoring, erosion, valve
spool sticking and other internal component caused by cavitations, contamination, high oil temperatures
and excessive hydraulic pressure.
• Consequences of excessive system back pressure within the machine to which the HWP-120 is
attached. Excessive back pressure can cause degraded performance from the processor.
• Any premium for overtime labor requested by the purchaser.
• Costs of transporting the processor to and from the location at which the warranty service is performed.
www.HalversonWoodProducts.com
218-587-2065
To Next Page
Loading...