DIAGRAM OF 120 MAIN PARTS
1. 4-WAY SPLITTER HEAD 5. GRAB ARM 9.LEAD HOSES
2. CHAIN SAW 6. OIL CONTAINER 10. LEG
3. CHAIN SAW MOTOR 7. TABLE 11. FEET
4. CHAIN SAW GUARD 8. SPLITTER TROUGH
Labels
Your HWP-120 Firewood Processor carries prominent labels as reminders for its proper and safe
use. Shown below are copies of all the labels that appear on the equipment. Take a moment to
study them and make note of their location on your processor before you operate the unit. Replace
damaged or missing labels immediately.
GENERAL SAFETY, CONTINUED
www.HalversonWoodProducts.com
218-587-2065
To Next Page
Loading...