5
How to Assemble
2. Align grooves of Heating
Element Assembly with
grooves on Base. Push down
on Heating Element Assembly
to connect it to Base.
NOTE: Heater cannot be
turned on unless correctly
installed on Base.
3. To assemble Handle, squeeze
tines of Handle together. Align
tines with round holes on
metal Bracket of Basket.
1. Place Base on a stable, flat
surface. Insert Removable Oil
Pot into Base.
4. Release tines to allow them to
spread and then pull Handle
back to lock into metal bracket.
5. For storage: Push Handle into
Frying Basket and squeeze
tines together to remove
Handle.
6. Align Lid toward Heating
Element Assembly and place
on Base.
To Next Page
Loading...
