Need help?Do you have a question about the Hamilton T1 and is the answer not in the manual?
General| Weight | Approx. 5 kg (11 lbs) |
|---|---|
| Power Supply | 100-240 VAC, 50/60 Hz |
| Dimensions | Approx. 30 x 25 x 15 cm |
| Display | Color touchscreen |
| Tidal Volume Range | 20-2000 mL |
| FiO2 | 21 to 100% |
| Operating Temperature | 10 to 40°C (50 to 104°F) |
Identifies key components on the front of the HAMILTON-T1 ventilator.
Details ports and connections on the side of the HAMILTON-T1 ventilator.
Explains the elements and layout of the main user interface display.
Step-by-step guide for correctly installing the expiratory valve.
Instructions for connecting a coaxial breathing circuit to the ventilator.
Instructions for connecting a dual limb breathing circuit to the ventilator.
Guide for connecting adult/pediatric flow sensors to the ventilator.
Procedure for connecting the internal pneumatic nebulizer.
Steps for attaching and connecting a CO2 mainstream sensor.
Guide for inserting the sample cell and attaching a CO2 sidestream sensor.
Details on components and cable connections for an SpO2 monitor.
Procedure to enable CO2 and SpO2 monitoring on the ventilator.
Steps to conduct preoperational checks before using the ventilator.
Guidance for addressing issues if preoperational checks fail.
Guide on utilizing the Quick Setup function for patient ventilation.
Instructions for choosing and applying different ventilation modes.
How to adjust various control parameters on the ventilator interface.
Procedure for setting and modifying alarm limit values.
How to navigate to and view patient monitoring parameters.
Interpreting compliance and resistance using the dynamic lung visualization.
How to check the O2 consumption parameter for transport readiness.
Formulas for estimating O2 consumption for smaller and larger patients.
To Next Page