3. Tests and calibrations
Step one
1
Touch Preop check in the Standby window.
The System > Tests & calib window is displayed.
2 Touch the Tightness button to perform the
tightness test.
1 Connect ventilator to AC or DC power and an
oxygen supply.
2 Assemble the patient breathing circuit.
3 Turn on power.
The ventilator runs a self-test and displays the
Standby window. Use only if ventilator passes all
tests.
3.1 Performing the preoperational checks
Preop
check
Tightness
To Next Page
Loading...