4.3 Adjusting controls
To adjust controls
1
Touch the control to adjust.
The control button turns orange.
2 Use the P&T knob to change to the
desired setting.
3 Confirm changes to the setting by touch-
ing the control again or by pressing the
P&T knob.
The control button turns blue.
Confirm changes before modifying
another control.
The following parameters are set based on ideal body weight (IBW): Vt, Rate, Thigh, Tlow, TI,
ExpMinVol, and Vt alarm limits. The ventilator uses the Vt/IBW setting to set the initial delivered Vt
in volume-controlled modes.
See glossary of control parameters on page 32.
To Next Page
Loading...