The HAMILTON-T1 has three congurable Quick Setup buttons.
Settings can be congured in advance according to your institution’s standard protocols.
Once congured, you can start ventilation in six easy steps.
1 Touch one of the three Quick Setup buttons.
2 Touch Male or Female.
3 Touch Pat. Height and adjust patient height using the Press-and-Turn knob.
The ventilator uses patient height and gender to calculate the ideal body weight (IBW). IBW is
used to determine several startup settings (see page25).
4 If required, touch Modes tab to change ventilation mode.
5 Review control and alarm settings.
6 Touch Start ventilation.
To Next Page
Loading...