Hamilton WSA50 - Quick Install

4
QUICK INSTALL
1. Unpack
Verify all the accessories are included in the package.
2. Install
Install the amplier in a clean and dry environment.
An integrated mounng bracket allows mounng to a wall or a
at surface, we suggest making sure you complete all
installaon steps before permanently mounng.
3. Speaker Wire Connecon
The Hamilton WSA50 can handle speakers from 4-16ohms
impedance.
(We recommend using a quality 2 core cable of 42 strands).
Connect the speakers to the amplier, nong the posive and
negave terminals match with the posive and negave
terminals on your speakers.
(Note: speaker connector can be unplugged for ease of installaon).