Stable time
Stabilization time length refers to the sensor reading mode, detect the scene changes in the reader before
reading the picture need to wait for the image stabilization time. Stabilization duration is set from 0 to 25.5
seconds in 0.1 second steps. The default image duration is 0.4 seconds.
Sensitivity
Sensitivity refers to the degree of change of the scene detected in the sense reading mode. When the
reader to determine the degree of change in the scene to meet the requirements, will switch from monitoring
status to read status.
The same bar code reading delay
It is not avoided that the same code is read consecutively multiple times, and the reader may be required
to read the same code if it can not read the same code continuously for a period of time in this mode. Set code
and continuous mode the same.
To Next Page
Loading...
Need help?
General
