1 Start
1.1 Introduction
HBCS2D100U barcode reader, the application of the country's leading intelligent image recognition
algorithm, and on this basis developed a set of advanced bar code reading algorithm, so as to realize the
reading of smaller size, higher version of the bar code function
1.2 About this Manual
This manual mainly provides various function setting commands of HBCS2D100U reader. By familiarizing
yourself with the introduction of various function commands in this manual, you can change the function
parameters of HBCS2D100U, such as communication interface parameters, reading mode, prompt mode and
so on.
HBCS2D100U products have been shipped from the factory has been configured to fit most commonly
used functions of the parameters, in most cases the user can make adjustments without adjustment can be
used in the appendix of this manual, lists the default HBCS2D100U features and parameters for reference.
1.3 Barcode reading operation
Thanks to the leading image recognition algorithm in the country and the barcode decoding algorithm
developed on this basis, it is very easy and accurate to read barcode symbologies. Even if the bar code symbol
at any rotation angle, will not affect the reading. In reading, the HBCS2D100U aimed at reading the bar code
symbol can be.
1.4 Barcode Scanner Settings
1.4.1 Set Code Switch
By turning on the setting code function, the parameter setting of the reader can be performed by scanning
the setting code.
Output setting code content
To Next Page
Loading...
Need help?
General
