Hamlet HBCS2D100U User Manual

4 Reading area
For different applications, users need to identify the area there will be some differences, by scanning the
following setting code can be set.
4.1 Full area
When the reading area is full area, the reader will scan the barcode with the center as the priority, and the
barcode may be anywhere on the screen.
* Full area
4.2 Only the center area
When the reading area is the center area, the center position of the barcode must be within the set center
area, and the bar codes that are not in the area are not recognized and output.
Only the center area
Set the center area size
The center area is an area centered on the whole image center. The size of the area is set in proportion to
the width or height of the entire image, ranging from 1 to 100. If the setting value is 20, that is, Located in a
center area of 20% of the width of a 20% height area.

Hamlet HBCS2D100U Specifications

General

Brand	Hamlet
Model	HBCS2D100U
Category	Barcode Reader
Language	English