18 4V LITHIUM RECHARGEABLE SCREWDRIVER
MAINTENANCE
CLEANING
Avoid using solvents when cleaning plastic parts. Most plastic parts are susceptible to
damage from various types of commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, carbon dust, etc.
STORING
Store the machine, operating instructions and where necessary the accessories in the origi-
nal packaging. In this way you will always have all the information and parts ready to hand.
Pack the device well or use the original packaging in order to avoid transit damage. Always
keep the machine in dry place.
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The tool does not work Integrated Lithium-Ion
battery is depleted
Charge the integrated
Lithium-Ion battery
The tool stops rotation
during operation
Integrated Lithium-Ion
battery is depleted
Charge the integrated
Lithium-Ion battery
Bit cannot be installed
Bit does not t the 6.35mm
hex bit holder
Use suitable adaptor
Chervon Australia Pty Ltd
Unit 13, 1488 Ferntree Gully Rd
Knoxeld, VIC 3180
To Next Page
Loading...
