Hammond L series User Manual

1-22.
1-23.
The
RHYTHM
VOLUME
control, mounted
1-24.
to the right of
the rocker
tabs, regulates
the loudness
of
the
rhythm
voices
relative
to the other organ
voices.
The
organ's
expression
pedal
also
affects
the rhythm
voices except
brush and
cymbal.
The BRUSH
and
CYMBAL
voices sound
without reverberation. The
remaining
voices
are
reverberated whenever
a
REVERB
tab
on the organ's control
panel
is depressed.
EXTERNAL
EQUIPMENT.
-
The
L-lOO
Series
organs
may be
equipped with
ex-
tension
speakers,
external
inputs
and
earphones.
EXTENSION
SPEAKERS.
-
A
Hammond
Model
PR-40
Tone Cabinet
may be used
as an extension
speaker.
A
Tone
Cabinet
1-25.
Control
Kit,
P/N
AO-22625-2
is
required
for
proper
interconnections.
Installation
instructions are furnished
with the kit.
EXTERNAL
SOUND SOURCE.
-
A record
player
or
microphone
equipped
with
a
suitable
preamplifier,
or a radio,
can
be
played through
the organ's
speakers.
The
device
used
should have
an output
level of
about
1/2
volt rms
maximum,
and
should
have
its own volume
control,
since the
organ
volume
controls
will
not affect
the
signal. The
organ
may be
played
at the
same time.
To
connect
an external
sound
source,
a
Switchcraft Type
330 Fl
"Y"
connector
is
required.
Remove
the
connector
cable
from
the WH
terminal
on the
power
amplifier.
Insert
the
''Y"
connector
into the
terminal,
and
insert
cable
previously
removed
into
one
arm of
the "Y".
Connect
external
sound
source
to the
other arm.
EARPHONES.
-
hi
order
to use
earphones,
the output
jack
and
network
shown
in
Figure
1-12
are
required.
When
earphones
are
in
use,
organ
speakers are
silenced.
GN.
BLK.
Organ
Spk.
wires
47a
SWITCHCRAFT
SF-JAX #25
OR
55
ji
Use
Koss
Model
SP-3.
Figure
1—12.
Earphone
Adapter Circuit

Hammond L series Specifications

General

Brand	Hammond
Model	L series
Category	Musical Instrument
Language	English