EasyManua.ls Logo

HAMPTON BAY 26613 - User Manual

HAMPTON BAY 26613
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this ceiling fan. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Item # 458-301, 458-633
Model # 26613, 26623
UL Model # 52-WWDIV
USE AND CARE GUIDE
WINDWARD IV 52-INCH CEILING FAN
Questions, problems, missing parts? Before returning to the store call
Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM

Questions and Answers

  • T
    tateashleyAug 1, 2025
    What to do if my HAMPTON BAY 26613 will not start?
    • D
      David RamirezAug 1, 2025
      If your HAMPTON BAY Fan isn't starting, here are a few things to check: * Inspect the main and branch circuit fuses or breakers. * Verify the wire connections to the fan and switch in the switch housing. * Check the battery in the remote control. * Make sure you're within the remote's operational range of 10-20 feet. * Turn the power off, then ensure the dip switch settings match on both the remote and the receiver.
  • X
    Xavier FloresAug 11, 2025
    Why is my HAMPTON BAY 26613 Fan so noisy?
    • M
      Melody BrownAug 11, 2025
      If your HAMPTON BAY Fan is making noise, consider the following: * Make sure all motor housing screws are tightened securely. * Check that the screws attaching the fan blade bracket to the motor hub are tight. * Ensure wire nut connections aren't rattling against each other or the switch housing's interior. * Allow the fan a 24-hour 'breaking in' period, as most new fan noises disappear during this time. * If using a light kit, tighten the screws securing the glassware and check that the light bulbs are secure. * Confirm the canopy has a small gap from the ceiling, not touching it. * Verify your outlet box is secure and that rubber isolator pads were used between the mounting plate and the outlet box.
  • L
    Laura GomezAug 21, 2025
    How to fix a wobbling HAMPTON BAY Fan?
    • S
      Sarah ContrerasAug 21, 2025
      To address a wobble in your HAMPTON BAY Fan, try these steps: * Ensure all blade and blade arm screws are tightened. * Check blade levels by measuring the distance from each blade tip to the ceiling; deviations should be within 1/8 inch. * Run the fan for ten minutes. * If the wobble persists, use the provided blade balancing kit.

Summary

Safety Information

Installation

Mounting Options

Guidance on different methods for mounting the ceiling fan.

Assembly

Attaching Fan to Electrical Box

Connecting the fan assembly to the ceiling electrical box.

Hanging the Fan

Procedure for securely hanging the fan assembly onto the mounting bracket.

Making Electrical Connections

Guide for connecting the fan's electrical wires to the house wiring.

Mounting the Fan

Final steps to secure the fan canopy to the mounting bracket.

Operation

Troubleshooting

HAMPTON BAY 26613 Specifications

General IconGeneral
BrandHampton Bay
Model26613
TypeCeiling Fan
Number of Blades5
Light KitYes
FinishBrushed Nickel
Blade ColorWalnut
Indoor/OutdoorIndoor
Reversible MotorYes
Light Kit IncludedYes
Indoor/Outdoor UseIndoor
Blade Span52 inches
Motor TypeAC Motor
Blade Pitch (degrees)12 degrees
Motor Speed3 speeds

Related product manuals